elaine elaine
My first experience with the Vinyl Sulphon dyes and I don't think what happened is from the dye...I prewashed then soaked-overnight in 5 gallon of water/1/2 cup sodium carbonate (soda ash) which brought the H20 pH from tap water measure of 5.4 to > 8.6 (the highest reading on my spa strips) The water was not slippery as really high pH water becomes, so I don't believe it was too strong.....Anyway, after dyeing and allowing the cotton slub/boucle-to be used as weft in towels-to sit for nearly 24 hours at 85degrees(I don't have a steamer) I rinsed the yarn under running water until clear. With the last wringing out (by hand) Ibegan to hear breaking sound and saw ends-many ends poking up-even gentle pulling caused the threads to just break apart. The entire skein-about 6 ounces of yarn is just trashed! Any ideas what would cause this? The yarn was strong and sound prior to this....I'd used some recently, in the un-dyed color for weft....
Any suggestions or advice will be appreciated. I really want to dye some of the multiple cones of cottons to use as either pattern or tabby weft for handwoven towels.
Quote 0 0