Chuzley Chuzley
I bought the Paper Marbling kit the other day and had my first attempt at marbling yesterday. I have a question that I'm hoping you may be able to help me with?

I followed the instructions for making the methocel size, however, amended the quantities to suit how much I required (I didn't need a whole gallon for my first attempt). I therefore added 1 tablespoon of Methocel to 2 pints of warm water, whisked it for about 5 mins and poured the liquid into my tray (leaving for about 1 hour before my first marbling attempt). What I noticed was that the size appeared to sink to the bottom (there was a layer of thick gluggy size at the bottom and a layer of what seemed to be more of a water consistency at the top). I wasn't sure if this was right but went ahead anyway and the marbling worked quite well although the paints moved around the size more than I thought they should (They were very fluid). I tried again with the combs and this is where you would normally get some patterns coming through, however, they didn't work as the paints moved around too much and again I thought it may be because the size wasn't mixed properly?

Can you please let me know if I mixed the size properly or if there was a problem with it? If the size does seem to sink to the bottom leaving a layer of water on top, can I mix it up again or should I start again?

Any help you can give would be great. Thanks!
Quote 0 0
Celia Buchanan Celia Buchanan
Hi,
Did you add a tablespoon of amonia? That should help a more even dispurtion of the Methocel.
Celia
Quote 0 0
Tessa Tessa
I have had a similar problem. I have tried twice. The first time there were bits that sank like in the OP I did add some ammonia both times. The second time I used an electric whisk and the dispersion was much better.
However the results on the silk were disappointing. The red colour spread too far and ended up a very pale pink on the silk, barely visible. The black would not spread at all. It stayed in a tight drop. When I tried to spread it with a cocktail stick it just ended up looking like dead insects. The blue and green worked the best but still came out pale tho not as faint as the pink. The methocel mix turned blue.
I tried the black again diluted with a little water it spread a bit but looked grainy. It ended up a very pale grey on the silk.
Images I have seen on the internet show much more vibrant colours.
Do you have any idea what the problem is?
Quote 0 0
[Deleted User] [Deleted User]
Well, how frustrating! The best advice I can give you is to have you call into customer service and ask for either Monte or Asher - they both have the most experience with the Marbling Colors and I am woefully uneducated in that area.
The toll free number is 800 442 0455 - tell them Annette sent you

annette
Quote 0 0
Tessa Tessa
Hi Annette, I am in the UK so presumably it won't be a toll free number for me?
Quote 0 0
[Deleted User] [Deleted User]
oh fiddle!
Okay, yes, it wouldn't be toll free for you, not to mention all the time difference fuss! Let me talk to them and I'll see what I can find out. I suspect they'll have more questions (which is exactly why I thought it best to send you directly to the folks most in the know) but we'll do our best to get to the bottom of this.
One thing I know they will most likely want is the batch number off your kit - it is a stamped number - usually near the bar code.

thanks,
annette
Quote 0 0
Tessa Tessa
Thanks Annette The batch code is 37062
Tessa
Quote 0 0
[Deleted User] [Deleted User]
Tessa,

Thanks much. It will be Monday before I can speak with the fellas, but I'll be back to you as soon as I get some info.

annette
Quote 0 0
[Deleted User] [Deleted User]
Hi Tessa,

So, I had a conversation with the chemist and here are the points he made that are significant to your situation:
First, when mixing the methocel you should see no grains left at the end of mixing - the more mixing the better. He described the methocel hydration as a flower uncurling - it needs water, high ph (ammonia) and considerable sheer (mixing) to encourage the 'uncurling'.
Also, regarding the methocel and spread - the thicker your size the slower the paints will disperse. That would help with the problem with the red paint.
Oxgall or other dispersant will help with the black paint.
In tooling around the web I did find a reference that noted that softened water used with the methocel to make size can cause colors to be 'pale & fuzzy'. (http://www.marblingpaper.com/Marbling%20Instructions.html)
One last thing I didn't confirm with you - are you treating your fabric with an alum mordant before marbling?

if you have any more questions don't hesitate!
annette
Quote 0 0
Tessa Tessa
Hi Annette, thanks.
I did use the alum to treat the silk as in the instructions that came with the kit.
Can the alum solution be reused or does it get weaker once silk has been soaked in it?
I will try the methocel thicker which as you say should help with the red but what about the black that doesn't spread as I mentioned above?
Quote 0 0
[Deleted User] [Deleted User]
Tessa,

Yes, the alum solution can be stored and used until it is gone.
For the black paint you want to use some sort of dispersant. Oxgall is a traditional medium used for this, but a tiny bit (dip a toothpick into soap about 1/4 inch and then mix that into paint) of liquid dish detergent might help, too. It is a good idea to add the dispersant to only the amount of paint that you are using at the time.

annette
Quote 0 0
Tessa Tessa
Is the oxgall ok for using on silk?
Quote 0 0
[Deleted User] [Deleted User]
I've never heard anything to indicate that would be a problem, in fact, a quick google came up with several suggestions that it is a component of stain removal products specific for use with silk.

annette
Quote 0 0
Tessa Tessa
Interesting, thanks Annette I will try it the ox gall.
Quote 0 0
[Deleted User] [Deleted User]
Let me know how it goes!
Quote 0 0